MINI Cooper Acccessories + MINI Cooper Parts :: R56: 07-13 Hatchback 'S' + JCW :: Speed :: induction :: AEM R56 "S" Intake: N14

Move your mouse over image to zoom. Click to enlarge

Reviews

			(3 reviews)

If you have purchased this item and would like to leave a product review please sign in to add your review.
2 Most useful customer reviews (see all reviews):

Guest

Installed on a 2011 MCS. Very easy to install, except on 2011+. You must use your stock tube from the tubro due to two sensors being mounted in the tube. I trimmed down the AEM pipe to fit from the air box to the stock tube. AEM heat shield must also be trimmed on the N18 engine. The oil cap filler is closer to the front of the vehicle and will not allow proper bolt alignment without a trim. Overall outstanding.

Was the above review useful to you? Yes (4) / No (0)

Eric MacKay

Nov 3, 2021

Picked up the AEM cold air intake and just installed this past weekend on my 2012 R58 JCW. Th install was easy and went in quickly with a minor mod needed to the mounting hole which was drilled out a bit.But unless I missed something, the next morning I went to work with way less power now in the car. and I'm a bit perplexed by the issue.And the check engine light was on. disconnected the battery to try and reset the system with no luck. Car is now at the shop getting looked over. For something that in reading needed zero ECU or tuning needed, has me frustrated. Any reading have any insight would be greatly appreciated.

Advantages: quick, easy install

Disadvantages: loss of power

Was the above review useful to you? Yes (2) / No (1)

If you have purchased this item and would like to leave a product review please sign in to add your review.

AEM R56 "S" Intake: N14

SKU: 21-699@1

WEIGHT: 13.00 lbs

brand: AEM

Our price: $599.99

qty

Add to wish list

	Average customer rating: 4.99 out of 5 (based on 454 votes and 3 reviews)

You can earn 0 Motoring Points today. Click here
Ask a question about this part. Click here

Details

AEM intake for the US spec Gen2 Cooper S models up to the end of 2010 which is the N14 engine. Please note that the JCW engine stayed as the N14 into 2012 but the "S" model engine changed to the N18 in 2012.

The AEM intake is a two part design which includes the hood mounted air funnel to pull fresh air through the hood scoop and the main intake assembly that replaces the factory airbox. This is very similar to the DDM race intake but is entirely plastic which does not hold heat as long as metal and will not rust. Once installed the only upper stress bars that will fit are the GT spec and the AEM bar.

Check out the additional pics of the dyno charts as they show some good numbers!

Estimated Horsepower Gain: 6 HP @ 5650 RPM
Replacement Filter: 21-2037D-HK
TUV Approved (Europe): No
Intake Pipe Color / Finish: Black
California Restricted: Not legal for sale or use in California
Weight: 13.3 lb (6.1 kg)

The part number for the N14 engine includes the metal inlet hose as shown on the detailed image installed.

The AEM Intake: N14 is one of the many MINI Cooper Parts and Accessories that we carry and will fit the following MINI Cooper Models and Years:

Gen2 MINI:

R55-S MINI Cooper S Clubman: 2008, 2009, 2010

R56-S MINI Cooper S Hatchback: 2007, 2008, 2009, 2010

R57-S MINI Cooper S Convertible: 2009, 2010

R-Fifty WHAT?? Confused about what model MINI you have? We’re here to help. Check this out for more information.

The N14 engine was used in the S model until the end of 2010 and then all but the JCW models got the N18 engine starting in 2011. The JCW kept the N14 engine in 2011 and should have switched to the N18 engine in 2012.

Reviews

			(3 reviews)

If you have purchased this item and would like to leave a product review please sign in to add your review.
2 Most useful customer reviews (see all reviews):

Guest

Was the above review useful to you? Yes (4) / No (0)

Eric MacKay

Nov 3, 2021

Was the above review useful to you? Yes (2) / No (1)

If you have purchased this item and would like to leave a product review please sign in to add your review.

Customers' comments

installed a notch scoop on my r53 i love the way it looks, adds a more aggressive look and its priced right.

jeffery

I talked to Aron. He went out of his way on his day off. Came and open the shop since i was needing a flywheel for my R56-S. I leave about an hour away from the shop. We set up at time and he was there with no issues. Send me my way with a flywheel and i was able to put my mini back on the road the same day. Couldn't be any more happier. That is dedication and excellent costumer service. Thank you so much This is not the first time he goes out of this way for me. So i will keep continuing going to Outmotoring every time i need something. Next step are coil overs and wheel!

Ruben Morales

Anthony did an amazing job getting my mini parts to me!!! He went above and beyond to get me my parts on a ridiculous timeline. Even Aaron helped out trying to make this all happen for me! OUTMOTORING is my first stop for all my mini parts from this point forward strictly based on the amount of customer service they have provided!!! For once in my life, I will be going out of my way to tell everyone about OUTMOTORING. If you need parts rest assured, you're in good hands with these guys.

mitchell cieutat

Read MORE COMMENTS » Write Your Own Testimonial »