M14 or M12 Stud Conversion Kit: Race Ready
Mystery item sale!
Current specials
Save money on your next purchase
Click for details
Free shipping
Free shipping
with minimum purchase
Click for details
Hello Outmotoring,
I have purchased your stage 1 speed upgrade and the results are amazing.
Next I plan to add the header & exhaust. Also the brake upgrade.
Thank you for your research and advice.
I think it would be helpful if you also added a suspension replacement/upgrade option like your speed upgrades.
I am a pretty much amateur with all the products available, and as an owner of a 2008 convertible S will be needing to replace these components soon.
Please provide upgrade options.
Thanks,
Dave
David Greenough
Read MORE COMMENTS       Write Your Own Comment
M14 or M12 Stud Conversion Kit: Race Ready
DETAILS
. SKU m12sneed-race-stud
. WEIGHT 6.00 lbs
 
Price: $295.95
Share THIS!
select
select option
Quantity
You can earn 1183 Motoring Points in rewards when you purchase this product.
If you do a lot of wheel changes for Autocross or for frequent seasonal tire changes this kit is a must have. Having studs instead of traditional lug bolts makes aligning wheels to the rotor a breeze because the studs stick out from the hub and you basically just 'hang' the wheel on the studs and push it on. While there are other, lower cost stud conversion kits on the market, this kit is over engineered and designed for hard core track use. Remember, your wheel stud and lug nut are the only thing holding your wheel on at 100+ MPH!! Made in USA for race applications. These 12mm x 1.5 (2002-2006 MINI) or 14mm x 1.25 (all MINI 2007 to Present) thread wheels studs are custom made for MINI race applications. They are 92mm total length with 16mm of bullet nose, 51mm of lug nut thread, 10mm of shank and 15mm to thread into the wheel hub. Heat treated with rolled threads and rated at 190,000psi.

These wheel studs work with hub centric spacers up to 20mm. Lug nuts are 12mm x 1.5 thread with 17mm hex head or 19mm hex head for 14mm x 1.25 stud. Easy use in both stock, sport and race wheels and are made with 60 degree taper to fit stock and aftermarket wheels. They are also coated yellow, to prevent rusting and for easy locating on the ground or in your tool box. Includes 16 lug nuts and studs. details: - Wheel stud total length- 92mm - Lug nut threaded length- 51mm - Bullet nose length- 16mm - Shank length- 10mm - Thread wheel hub end length- 15mm Insights: Wheel studs make mounting wheels easier and are recommended for all aftermarket wheels. Use small amount of anti seize on lug nut threads during install and use Red Loctite to install the stud in the hub. Recheck wheel studs after first 2 uses and spot check from then on. Replace wheel studs after 12 track days or every 2 years. Remember to carry spares. (In August of 2006 MINI switched to a 14mmx1.25 lug. Older cars use a 12x1.5)

Fits these MINI models: any MINI 4 lug (all but Countryman, Paceman and the F Series/ Gen3 MINI)- however contact us if you would like to get a set for a 5 lug setup.

Installation notes: - Clean lug holes with brake cleaner, make sure threads are dry. - Use threadlocker (Locktite 292 RED) on short stud ends, - torque to 15-16 ft.lbs. - Torque nuts to 104 ft lbs.
CUSTOMER FEEDBACK 373 ratings | Rate this product

Product rating

Customer Reviews

There have been no reviews for this product.
Online Payment Service



Paypal
Paypal
Powered by Lumino Internet Lumino Internet
© 2002-2016 Accessories and Parts for MINI Convertible, MINI Cooper Hardtop, MINI Clubman, MINI Countryman, MINI Hatchback, and MINI Paceman