NM Engineering Adjustable Sway Bar End Links: Gen1+2

Details

Available for either front OR rear (front available in standard OR the shorter 'SPEC-B' 1.5" shorter) applications. See drop down menu for options.

NM Engineering’s Rear Adjustable Sway Bar Links provides three benefits:
 * Direct transmission of suspension movements to the sway bar
* On lowered vehicles, allows repositioning of sway bar to neutral position
* Can eliminate sway bar pre-loading to compensate for poorly manufactured sway bars

Everything starts with the material – after all, it is the foundation of the part. NM Engineering did not skimp here as these links are precision CNC machined from 7075-T6 aluminum in California. Because this is a high-stress part, 7075 was chosen because it has the same tensile strength as steel, yet is much lighter. Just to compare, 7075-T6 has almost twice the tensile strength compared to 6061-T6. Another benefit afforded by 7075-T6 is it allowed NM Engineering to machine or turn-down the centers of the links to save weight and stay clear of elements such as brake lines and brake pad sensor wires. To give you an idea how thin the link is, the centers of the NM links are thinner than a standard AA battery. NM’s links also utilize precision CNC machined stainless steel ball-joint spacers as stainless steel is stronger and more durable than 6061 aluminum alloy. To maximize adjustability, NM chose a special thin jam nut which allow an additional ¼" of adjustment compared to others being sold in the market. The length of front and rear links are compensated for lowered vehicles so the sway bar arms will sit in a neutral position relative to the swing arm.

 The length of the rear links are 25mm shorter and the fronts are 12mm longer compared to OE links. This is also 'the' solution for enthusiasts out there with coil-over suspension that lower the ride height more than 1.5". By the way, a quick note on the materials used…whether it is 6061-T6 or 7075-T6, all grade materials purchased are certified. Uncertified scrap or overrun materials from metal/alloy vendors is NEVER used.

Length of the GREY mid section shaft of each part number:
 NM.328856= 14cm
 NM.328857= 25CM
 NM.328858= 21.7mm


 NM Engineering’s Rear Adjustable Sway Bar Links will not yield like their OE counterparts making sure that all suspension movements are transmitted to the sway bar for maximum performance. This part is a must, especially on lowered vehicles or cars equipped with aftermarket sway bars. Notes: Finish : Type III Hard Anodize

These NM Engineering Sway Bar End Links are one of the many MINI Cooper Parts and Accessories that we carry and will fit the following MINI Cooper Models and Years:

Gen1 MINI:

R50 MINI Cooper Hatchback: 2002, 2003, 2004, 2005, 2006

R52 MINI Cooper Convertible: 2004, 2005, 2006, 2007, 2008

R52-S MINI Cooper S Convertible: 2004, 2005, 2006, 2007, 2008

R53-S MINI Cooper S Hatchback: 2002, 2003, 2004, 2005, 2006

Gen2 MINI:

R55 MINI Cooper Clubman: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

R55-S MINI Cooper S Clubman: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

R56 MINI Cooper Hatchback: 2007, 2008, 2009, 2010, 2011, 2012, 2013

R56-S MINI Cooper S Hatchback: 2007, 2008, 2009, 2010, 2011, 2012, 2013

R57 MINI Cooper Convertible: 2009, 2010, 2011, 2012, 2013, 2014, 2015

R57-S MINI Cooper S Convertible: 2009, 2010, 2011, 2012, 2013, 2014, 2015

R58 MINI Cooper Coupe: 2011, 2012, 2013, 2014, 2015

R58-S MINI Cooper S Coupe: 2011, 2012, 2013, 2014, 2015

R59 MINI Cooper Roadster: 2012, 2013, 2014, 2015

R59-S MINI Cooper S Roadster: 2012, 2013, 2014, 2015

R-Fifty WHAT?? Confused about what model MINI you have? We’re here to help. Check this out for more information.