Out Motoring Custom Gauge Faces: Gen1

Details

PLEASE NOTE: This set has 'Miles per Hour' graphics. If you prefer 'Kilometers Per Hour' please select that option from the drop down menu.

ALSO NOTE: These are printed/assembled as ordered and will take 6-8 weeks to process before shipping. Thanks for your patience.

I have been wanting to redesign the gauge faces of the MINI since before I owned one. Seeing it at the Detroit Auto Show and experiencing the car in person made me realize that the dials had virtually no detail and were a bit boring. So, after way too many months I finally got around to redesigning them. First, I wanted to get rid of as many of the 'busy' things that detract from the design. So, the warning lights went away....until you need them and THEN they light up. The result is a clean, simple look with more open space. The next thing I did was add more tick marks around the perimeter to show more detail. I also changed the font to make it a bit more interesting yet still refined and in character. Lastly I rotated all of the numbers for both the tach and speedo so they read horizontal to the ground. To top it all off, I added some flavors, again within what I consider to be in good taste.

IMPORTANT
Please see drop down menu to select "standard" gauge layout or "chrono/navigation". MINIs with the Chronopack option or MINIs with the Navigation option will have both the tachometer and speedometer side by side (same size) on the steering column while 'standard' gauges will have the speedometer in the center above the CD player and the tachometer on the steering column (1 large + 1 small). See detailed images.

Now available in:
Charcoal Grey (shown in pic),
White
Black
Red
Green (close to British Racing Green)
Blue (a bit more neutral than the Hyper Blue but works with the Indy Blue as well)
Black on Grey Union Jack
Black and Grey Checkerboard.

All of these yield a good amount of contrast so you can still see what you need but add a ton of character to your MINI. Due to a limitation in the printing process there will LIKELY be some variation to the back lighting. Please be aware of this as it may not appear as even and consistent as the factory lighting.

These subtle design changes make for what I consider the best looking aftermarket gauges available. When made to our strict standards, you can be assured that you have the best available for your MINI. Installation is straight forward and can be done by your average mechanically inclined person with 1-2 hours of time to invest. Otherwise, it may be best to hire a professional installer.

The Set of Replacement Gauge Faces is one of the many MINI Cooper Parts and Accessories that we carry and will fit the following MINI Cooper Models and Years:

Gen1 MINI:

R50 MINI Cooper Hatchback: 2002, 2003, 2004, 2005, 2006

R52 MINI Cooper Convertible: 2004, 2005, 2006, 2007, 2008

R52-S MINI Cooper S Convertible: 2004, 2005, 2006, 2007, 2008

R53-S MINI Cooper S Hatchback: 2002, 2003, 2004, 2005, 2006

R-Fifty WHAT?? Confused about what model MINI you have? We’re here to help. Check this out for more information.