When your MINI starts getting into the 60K+ range in mileage it's time to start thinking about replacing stuff like belts, gaskets and other rubber hoses that tend to break down over time. If you have a Cooper S and are installing a smaller supercharger pulley now is the time to replace the belt. We have belts for the base Cooper as well as Cooper S, JCW Cooper S as well as belts for various supercharger pulley diameters. If you're going to a 17% or 19% pulley you will need to get a smaller belt in order to allow the belt tensioner to work properly and even if you have a stock Cooper S you can use our standard replacement belt which is also ideal for use with a 15% pulley. If you've got over 25K miles and you're doing a pulley I recommend replacing your pulley for added security and to save on labor charges later on.

This is produced by "Gates" who supplies not only MINI but also Carquest and Napa and while the physical belts are the same and come off the same production line they simply private label belts for each of these retailers/brands so you are getting the same belt as supplied by MINI with different part numbers/designations.

Here are the options:
gates: #
gates: #060547 =1404mm = stock Cooper S belt
gates: #060539 = 1385mm = ok for stock OR w/ 15% pulley
gates: #060535 = 1379mm = best w/ 15% or 17% pulley (and with either the 0% or 2% crank pulley)


Fit these MINI models:
R50: 2002-2006 Hatchback: Cooper
R52: 2004-2008 Convertible: Cooper and Cooper S
R53: 2002-2006 Hatchback: Cooper S


Reference info:



We offer this brand:
Gates/carquest K60532=53 7/8"/1367mm
Gates/carquest K60535=54 1/4"/1379mm
Gates/carquest K60539=54 1/2"/1385mm
Gates/carquest K60547=55 1/4"/1404mm

Other brand available:
NAPA/#60535=54 1/8"/1375mm
NAPA #60539=54 1/2"/1385mm

Gatorback 4060537=53.74"/1365mm
Gatorback 4060539=54"/1371.6mm

Please see "detailed images" for a chart supplied by Alta to define which belt is best for various pulley setups.
Priced individually