Cravenspeed Flexpod Quad Gauge Kit

Details

It has been well established that the Mini lacks vital instrumentation and this kit is one of the best values on the market to solve this problem. These kits available in numerous gauge configurations contain everything you will need to mount the gauges discretely and securely on the steering column of the Mini Cooper. As with all FlexPod products, the installation requires no permanent vehicle modification. The high quality machined aluminum mounting parts and Marshall Instruments gauges look stock once installed. That means you'll never have a reason to remove them... but if you did, all elements can be removed without damage to your Mini.

An oil pressure, water temperture, boost and oil temp gauge can give you a lot of information about the health of your vehicle. By establishing a good baseline knowledge of your Mini's readings while the car is running well, you can be alerted to any issues before they become costly problems. Low oil pressure could be a sign of a leak, worn out oil, a low oil level, high oil temperatures, or a damaged oil pump. By discovering these issues before they lead to complications or engine failure you will be much safer in a Mini that will last longer. This gauge from, Marshall Instruments, runs on a stepper motor and includes a peak recall and warning feature. With this feature, you can set your gauge ring the alarm when your oil pressure has dropped out of your desired range. Using the included Tapless Adapters and other adapters you will be able to install the oil pressure sender in line with the factory sender to ensure good reading and reversible installation.


A boost gauge (for "S" MINIs only) may not be as important as a oil pressure gauge, but it is easy to install and a fun gauge to have in your Supercharged/Turbocharged Mini. The boost gauge is much more active than the pressure gauge which will have a relatively steady reading when all is well with your Mini. In contrast, the boost gauge is giving you the constantly changing PSI output of your turbocharger.

Available Gauges:
Boost
Oil Temp
Oil Pressure
Water Temp


Sample of Parts (each kit may have different adapters, etc)

1- FlexPod Bracket (to fit your models)
2- splitters to connect base rail to pods
4- FlexPod 52mm Gauge Cups
4- Gauge Cup Back Caps
- adapters and modules as required
1- Boost gauge
1- Oil Temp gauge
1- Oil Pressure gauge
1- Water Temp gauge

Fit these MINI models:
Gen1 MINI:
R50: 2002-2006 Hatchback: Cooper
R52: 2004-2008 Convertible: Cooper and Cooper S
R53: 2002-2006 Hatchback: Cooper S

Gen2 MINI:
R55: 2008-xxxx Clubman: Cooper and Cooper S
R56: 2007-xxxx Hatchback: Cooper and Cooper S
R57: 2009-xxxx Convertible: Cooper and Cooper S
R58: 2011-xxxx Coupe: Cooper and Cooper S
R59: 2011-xxxx Speedster: Cooper and Cooper S
R60: 2010-xxxx Countryman: Cooper and Cooper S
R61: 2010-xxxx Paceman: Cooper and Cooper S

Please note that a BOOST gauge will NOT work on the Cooper model- only the S model which is either Tubro or Supercharged. If you would like to order this kit for a NON Supercharged or Turbo MINI Please let us know and we can swap out the Boost gauge for a voltmeter.