Flash Tune: Gen2
Move your mouse over image to zoom. Click to enlarge

Reviews

There are no product reviews for this product yet.

If you have purchased this item and would like to leave a product review please sign in to add your review.

Flash Tune: Gen2

SKU:  JMTC-TUNE
WEIGHT:  1.00 lbs
brand: JMTC
Our price: $659.95
 
qty
 
 

  • Earn Cash Rewards You can earn 2639 Motoring Points today. Click here
  • Ask a question about this partAsk a question about this part. Click here
  • Be Social

Details

Want more power and torque, than let the experts at JMTC optimize your ECU. They have had over 20 years experience making power on not only Mini Coopers but Fiat and Peugeot to name only a few. With their flash we remap the boost pressures, air fuel ratios, ignition timing, throttle response and the rev limiter as well as many other parameters. They also keep them in safe limits to keep your engine running strong. So If you're looking for a safe tune that will make the most power and torque possible than this is the tune for you. Let our expert show you the power with minimal upgrades or really amp it up with custom tuning to match your specific upgrades.

This requires your stock ECU to be shipped at your cost to the address we will supply after the order is processed. The price paid at checkout on our site includes 3 day return shipment of the ECU after it has been programmed.

Details/Benefits
-Factory maps changed no redirects or sensor tricking
-Optimized your ECU program
-Original file saved
-Multiple tune files available
-Safe chip tuning with over 20 years of experience
-Road-tested before and track tested before released
-Does not change ECU tune counter
-Tuning module available 07 to 10 MCS/JCW
-Retains OEM safety limits
-Safe Timing advancement
-High flow MAF delete tuning available
 
Important Notes:
-Once the ECU has been removed from your vehicle, DO NOT turn on the ignition
-Require 91 Octane or higher fuel!
-Price includes return 3 day shipping
-For optimal performance list All engine, exhaust, turbo, and intake upgrades when the order is placed or email us directly with your order ID#.

The JMTC Custom Flash Tune: R55/6/7/8/9/60/61 is one of the many MINI Cooper Parts and Accessories that we carry and will fit the following MINI Cooper Models and Years:


Gen2 MINI:

R55 MINI Cooper S Clubman: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

R56 MINI Cooper S Hatchback: 2007, 2008, 2009, 2010, 2011, 2012, 2013

R57 MINI Cooper S Convertible: 2009, 2010, 2011, 2012, 2013, 2014, 2015

R58 MINI Cooper S Coupe: 2011, 2012, 2013, 2014, 2015

R59 MINI Cooper S Roadster: 2012, 2013, 2014, 2015

R60 MINI Cooper S Countryman: 2010, 2011, 2012, 2013, 2014, 2015, 2016

R61 MINI Cooper S Paceman: 2013, 2014, 2015, 2016

R-Fifty WHAT?? Confused about what model MINI you have? We’re here to help. Check this out for more information.

Cheater tuners, horrifying tuning practices, and destructive tunes all cost you big money and can produce lower power than a good tune!

Just because a particular tuner says their tunes are the best because they always seem to make so much more power than others does not make it the best option. Not all tuners are created equal nor do they (always) use proper tuning techniques to give you the most power and still remain safe.  Some tuners even cheat and use dangerous techniques costing you much more money than you could have ever saved from the cheap tuning. Once engine internals start to fail the cost goes up exponentially. These types of tunes are reckless and irresponsible not only do they make less power but they can also lead to catastrophic engine failure. This happens more often than you would think and chances are that you have an unsafe tune.

Some not so experienced low cost tuners will only make a few changes to the maps usually only adjusting the load and boost limit.  However make no changes to the fuel tables, timing, torque limit, boost limit, or load. They are not only leaving a huge amount of midrange power/torque on the table, the maps are not adjusted properly so the engine can go lean or rich at critical points.  Resulting in improper fueling, timing, and load tables/limits leaving you vulnerable to knock, detonation, pre-ignition. Especially if the car has multiple upgrades that supply extra fuel, air, like a big turbocharger or intake system.  All of this will result in lower power output, high EGTs, pre-ignition or knock and puts a lot of stress on the engine causing premature wear, and over time lead to catastrophic engine failure.

Even worse are the cheater tuners, that play the "I have the best tune because I make the most power gains". They do make a lot of power but it is short term, risky, and at your expense. This is because the timing advancement is in areas that we know are dangerous.  Some even incorrectly advance the timing straight across all maps, increasing the chance of pre-ignition, detonation, and stressing the engine.  This reckless shortcut strategy only leaves you holding the bag as every acceleration shortens the life of your engine and sometimes ending it instantaneously.

As if incorrectly advancing the timing was not enough, the only way that this risky timing advancement can be maintained is to also turn off the knock sensor entirely.  Otherwise, the ECU will detect the devastating unsafe condition and retard the timing to prevent engine damage that was caused by their unsafe advancement.  Unfortunately for you the knock sensor is one of the most important sensors’ used by the ECU. The ECU uses this sensor to monitor the engine’s performance, fine tuning the maps as you drive and is critical for preventing damage.  This sensor should never be disabled on ANY car for ANY reason, even cars without turbos.  

In addition to that disabling the nock sensor also turns off the one critical last ditch effort the ECU has to save your engine from extreme catastrophic events, the emergency fuel cut off.  This last resort/fail safe device is designed to save your engine in super extreme conditions from destruction. However with these horrifying insane tuning practices it will be disabled and on the one occasion that it is needed, it will not be there to protect your engine and your engine can fail catastrophically. This type of destructive tuning leaves your ECU controlling your engine in blind mode, while running in an extremely unsafe condition, and no way to protect or prevent engine damage.

With this kind of tuning ECU will have no way to monitor knock, the ECU won't re-write the map to a safe condition, and it won't cut the fuel when the ECU detects an engine killing condition.  This blatant disregard to engine safety is just reckless and ruthless and causes more engine failures than any other performance enhancing upgrade out there.  Unsafe tuning has done more to confuse the capabilities of these engines and damage reputations because the blame is always placed on other things like badly designed upgrades, large turbos, weak pistons, and high mileage.

These safety devices are designed to protect you and your engine and are the most important emergency factors that your ECU uses to save your engine when things go horribly wrong.  And believe me with unsafe tuning practices, problems happen quickly and they can cause major engine issues like cracked pistons, head gasket failure, bent/broken rods, bent cranks and pistons exiting the block.  Unfortunately there are a lot of insane tuners out there, they cause a lot of engine failures, and you alone are left holding the bag.

Making power is all about getting more fuel and air into the engine however when you cheat and use timing to make a name for yourself you show a blatant disregard to your customers and concern for their cars.  Knock is knock and pistons are not designed to hold up to the stress of it, not even forged pistons.  Forged pistons are only designed to hold up to the stresses of increased pressure created by extra boost and high compression forces of a high-performance engine.  However the force of Knock will destroy a forged piston just as quick and easy as a cast piston and your only defense is a mechanically sound engine (as a system) and quality tuning.

JMTC's tuners have been dyno tuning cars for over 20 plus years, starting on the OBD ECUs back in the 90s.   Also since JMTC focus/specialize on the Mini Coopers (and cars with the same engine) and has a lot of experience on these cars, turbochargers, engines, and ECUs.  JMTC knows how to make power, but more importantly we know how to deliver it in a safe manner.  JMTC understands how to make safe power without taking shortcuts or risks with our customers cars.  JMTC wants your car to run strong, last long and deliver the driving experience you want and doing it as safely as possible.  

Reviews

There are no product reviews for this product yet.

If you have purchased this item and would like to leave a product review please sign in to add your review.
 
 

Customers' comments

I've been ordering parts from Outmotoring's site for a few years now after having some bad experiences from other Mini part sites. Although I have only had a few order errors, Outmotoring has corrected it quickly both times. If 'to err is human' than Outmotoring is 'more human than human'. Keep up the good work guys and I'll keep buying from you!
Rick Dallimier

I own a 2013 Mini Cooper R59 and have ordered a significant amount of items from this website. ran into some issues with the fitment of some things but Aaron from Outmotoring was quick to solve the issue. I am very pleased with the quality of all the items I have ordered and as far as I am concerned, this is the only place to get genuine, high-quality MINI accessories and parts!

Thanks for the great service!
Nicholas

I ordered The chrome tail light frames for my clubman and got them in 3days, they are something the factory should have put on.
They look and fit great .
Also every mini should have a “light in sight”
No more twisted neck looking for the stop lights pete
Pete munoz

Read MORE COMMENTS »      Write Your Own Testimonial »