Details
Fitment Note
The oil pressure sender adapter included in this kit has M12 threads. In 03/2017 MINI began using a pressure sensor with M10 threads and discontinued the M12 threads in 04/2017. We highly recommended you verify your build date prior to purchasing. The build date can be found on the VIN sticker affixed to the driver's door jamb. If you are not sure if your build date has M10 or M12 threads, please call or email us with your VIN and we will be happy to help.
A Turn-key Solution for Adding Gauges to Your MINI
It has been well established that the Mini lacks vital instrumentation. Here is a kit that provides everything you will need to remedy that situation. This kit include two gauges of your choice along with everything required to install them. You'll get the FlexPod to allow you to discretely and securely mount your new gauges on the steering column of your Mini Cooper. As with all FlexPod products, the installation requires no permanent vehicle modification. Our high quality machined aluminum mounting parts and Marshall Instruments gauges look stock once installed. That means you'll never have a reason to remove them... but if you did, all elements can be removed without damage to your Mini. The same is true for the included wiring and adapters that allow the painless installation of the sending units for the gauges.
A Preemptive Defense
An oil pressure gauge can give you a lot of information about the health of your vehicle. By establishing a good baseline knowledge of your Mini's oil pressure while the car is running well, you can be alerted to any issues before they become costly problems. Low oil pressure could be a sign of a leak, worn out oil, a low oil level, high oil temperatures, or a damaged oil pump. By discovering these issues before they lead to complications or engine failure you will be much safer in a Mini that will last longer. This gauge from, Marshall Instruments, runs on a stepper motor and includes a peak recall and warning feature. With this feature, you can set your gauge ring the alarm when your oil pressure has dropped out of your desired range. Using the included Tapless Adapter you will be able to install the oil pressure sender in line with the factory sender to ensure good reading and reversible installation.
Motoring Fun
A boost gauge may not carry as many vehicle health benefits as a oil pressure gauge, but it is easy to install and a fun gauge to have in your supercharged or turbo MINI. The boost gauge is much more active than the pressure gauge which will have a relatively steady reading when all is well with your Mini. In contrast, the boost gauge is giving you the constantly changing PSI output of your supercharger or turbocharger.
Want to add Three or Four Gauges?
The Conventional Gauge Kit comes with everything you need to mount two gauges on your MINI, but did you know you can have three or even four? The more gauges the better! Send us an email to find out how!
Available Combos:
Boost and Oil Temp
Boost
Oil Pressure
Boost
Water Temp
Oil Pressure
Water Temp
Sample of Parts
(each kit may have different adapters, etc)
1- FlexPod Bracket X
2- FlexPod 52mm Gauge Cups
2- Gauge Cup Back Caps
1- Tapless Adapter
1- PSIclone Adapter
1- Marshall Instruments Oil Pressure Gauge with Peak Recall and Warning
1- Marshall Instruments Boost Gauge
1- Additional Wiring and Wire Connectors
Gauges included both silver AND black trim rings to match your interior and light color can be adjusted from orange/red to a white. See detailed images.
Bracket and or sending units shown in detailed images may not specific to your MINI, however once the correct model is selected from the drop down menu we will confirm which bracket AND sending units are needed to complete your custom gauge kit.
Please note that a BOOST gauge will NOT work on the Cooper model- only the S model which is either Tubro or Supercharged.
There are no product reviews for this product yet.
If you have purchased this item and would like to leave a product review please sign in to add your review.