MSD Ignition Coil for Gen 1 MINI Cooper

MSD Ignition Coil for Gen 1 MINI Cooper
Category: MINI Performance Parts
Posted:
Views: 4517
Synopsis: Spark more than interest!
This replacement MSD Ignion Coil intensifies the spark output of your ignition, helping your air/fuel intake charge burn more completely. This is especially good for cars with smaller supercharger pulleys and other upgrades. The results are smooth idle and improved mid-range power. Installation is a snap--the coils connect right to your factory wiring but the four copper sleeves in the corners will need to be drilled out about 1/16" to allow for the stock studs to fit. It is a good idea to use higher quality plugs and ignition wires with this coil pack. Please check out our Kingsborne wires and Beru and Denso spark plugs.

SPECS:
Maximum Voltage: 40,000 volts
Primary Resistance: .051 ohms
Secondary Resistance: 12K ohms
Inductance: 7 mH; Turns Ratio: 77:1

IMPORTANT: It is best to remove factory bolts from your factory coil, remove rotating sleeves from around factory bolt and use liberated factory bolts through the corners of the MSD coil.
___________________________________________________________________________________

The MSD Ignition Coil is one of the many MINI Cooper Parts and Accessories that we carry and will fit the following MINI Cooper Models and Years:


Gen1 MINI:

R50 MINI Cooper Hatchback: 2002, 2003, 2004, 2005, 2006

R52 MINI Cooper Convertible: 2004, 2005, 2006, 2007, 2008

R52-S MINI Cooper S Convertible: 2004, 2005, 2006, 2007, 2008

R53-S MINI Cooper S Hatchback: 2002, 2003, 2004, 2005, 2006


R-Fifty WHAT?? Confused about what model MINI you have? We’re here to help. Check this out for more information.



Comments on MSD Ignition Coil for Gen 1 MINI Cooper