Chrome Roll Bar Covers: R52

Details

The stock roll bars on the Convertible are black and they're kinda boring looking. This pair of replacement chrome trim covers are straight from MINI and are a perfect fit. They are actual replacements for the set that are in the car from the factory. Priced as a set of 2 (actually 4 pieces).

Instructions: Open the roof and fold the back seats down. At the back of the headrests there is a small plug pop that out with a small flat screw driver- behind it is a screw (torx) that holds the headrest on. Undo the screw to remove the headrest. Inside, where the headrest sits you will find two clips- use a screw driver to release - it may be best to have an extra set of hands as it is easier to get one person to release while the other person is prying, with a bit of force you can open the bottom cover enough to release the cover you want to replace. Remove the old cover open by using a screw driver then simply snap the new covers in place.

The Chrome Roll Bar Cover Set: R52 is one of the many MINI Cooper Parts and Accessories that we carry and will fit the following MINI Cooper Models and Years:

Gen1 MINI:

R52 MINI Cooper Convertible: 2004, 2005, 2006, 2007, 2008

R52 MINI Cooper S Convertible: 2004, 2005, 2006, 2007, 2008

R-Fifty WHAT?? Confused about what model MINI you have? We’re here to help. Check this out for more information.

If you're shopping around and notice this part for less, please note this is a Genuine MINI part NOT a aftermarket manufacturer part. Genuine MINI parts are often manufactured to higher standards with materials approved by MINI.