This replacement coil intensifies the spark output of your ignition, helping your air/fuel intake charge burn more completely. This is especially good for cars with smaller supercharger pulleys and other upgrades. The results are smooth idle and improved mid-range power. Installation is a snap--the coils connect right to your factory wiring but the four copper sleeves in the corners will need to be drilled out about 1/16" to allow for the stock studs to fit. It is a good idea to use higher quality plugs and ignition wires with this coil pack. Please check out our Kingsborne wires and Beru and Denso spark plugs.

SPECS: Maximum Voltage: 40,000 volts; Primary Resistance: .051 ohms; Secondary Resistance: 12K ohms; Inductance: 7 mH; Turns Ratio: 77:1.

IMPORTANT:
It is best to remove factory bolts from your factory coil, remove rotating sleeves from around factory bolt and use liberated factory bolts through the corners of the MDS coil.


Fits these MINI models:

02-06 Hatchback
04-08 convertible Priced individually