They do no disappoint. The trick is to 1-take your time.
2- be patient.
3- make sure you use soapy water. This will let you move them around.

Advantages: If you rush , you will get air bubbles. Either pull it off and start over, or take a small needle and poke a tiny hole so you can get the air out!

Disadvantages: None. I loved how this completely changed the look!

I would not recommend the Alta DV for several reasons. First many people are looking to upgrade or replace their faulty DV. This unit uses 1 part from the original stock part the yellow O ring that is prone to failure. You will likely have to pay extra and buy a new stock unit because they don't sell that yellow O ring separately. Second, you have to buy a boost tap that easily costs around $70. Overall, this affordable DV unit that supposedly improves performance will cost an extra $140 bringing the grand total to around $340.

Advantages: Absolutely nothing. Dont waste your money and instead get the Forge unit.

Disadvantages: Expect the cost to increase exponentially because it is an incomplete kit. The price is not the actual cost. It is closer to $340 with all the supporting parts. It uses old factory parts that are know to fail. Beware this is not a good option.

Got the green, it was darker than pictured, but still nice... Very easy to change out.

Car: 2012 Mini Cooper Countryman S R60 All4 manual transmission. Overall, this was a very good purchase. I did notice a bit quicker response in regard to torque and acceleration. I feel like my gear transitions are smoother as well as the drive feeling smoother. I didn’t notice any increase in vibration like some people were concerned with on the regular Cooper S models. Out Motoring is a very professional company and is my go to for mini parts.

Advantages: Smoother ride, quicker acceleration/torque.

Disadvantages: Installation was not as easy as it was “supposed” to be (never is, right? Ha) There are two bolts that hold the torque arm into place. Easy to remove the torque arm. Easy to place the inserts in the torque arm. However, it was physically impossible to align the torque arm into place (where the front of torque arm aligns with mount)with the inserts in them. I spent two hours trying to pry its way into place. I decided to safely place a block of wood around the same surface area as the oil pan and placed a jack/wood block under the oil pan. Now most people would say that is a big no no. However, the oil pan in the N18 engine is a very strong dense metal construction and did not damage. I removed the top/center engine mount bolt and very carefully raised the engine high enough to fit the torque arm into place without damaging the turbo pipe or oil pan.

Only one screw actually holds the badge holder tight against the grill. Very frustrating.

I bought this plug since I want the best for my MINI. However, when attempting to install it, it only goes a little in and stops. Maybe the threads don't match 100 %? I didn't want to force it and maybe strip the threads on my oil pan, so I installed a OEM plug instead. Nice idea with a magnet, though...

valve caps mini cooper s

Just like the original, only this one won't pop off when driving/shifting aggresively. Popped right on, tight fit, no real "install", just pull the loose/broken one off and pop the shiny new one on. Happy Motoring!

love it, i installed it on the wifes 04 R53 easy install.
after 1 year she still comes home saying how much she loves the sound of "Betty"

Dude, this is sweet! I am going to hit his site and check out the work. I am a new Mini owner and I want this in my office.

Any chance of making them in other colors for those of us with light colored MINI's?
Black or Red would be really nice...

Great cup holder. Installation is so easy it could probably be done by my dog if I gave her enough time.

Sliding the passenger seat forward, it does hit the cup holder. However, the cup holder does swivel left and right, so you can easily move the cup holder out of the way to make sure it doesn't hit the seat.

My only real gripe would be the price, but with the other one being around $70 and the fact the stock cup holders are TERRIBLE, this is a great buy.

Do not waste your time on this product. These will not stick to your wheels even after really carefully preparing the rims. The idea is great in theory but is absolutely not realistic. The adhesive on the protector does not stick enough and the momentum of the wheel rotating will rip the protectors right off. Not to mention anywhere you might have a scratch on the rim edge, it will not even come close to adhering... So same your money and don't drive so close to the curb so you won't need these.

Advantages: Great idea but no advantage...

Disadvantages: Poor adhesive

Looks fabulous! Only comment was that the dragon I received was in the shape of a "Z" not an "S" as shown in the picture!!

Buenas tardes estoy. Necesitando. Cluche Mini cooper JCW GP 2013 stage 2 PLUS . LO TIENEN DISPONIBLE Y PRECIO .

A nice addition to my black Countryman. Fitment is spot on. Easy installation.
Thanks Outmotoring for the fast shipping as well!!

In very short order I found the clear coat going away, leaving a tarnished look to the finish.

These pedals are sweet!! The grip is great, and they look awesome!

Purchased here. Installed upon new 2013 Hardtop delivery. Terrific looks and easy for dealer to install. Slats are covered in clear plastic sheath instead of chromed plastic sheath. Appears very dark black under most lighting angles but under others reflections give "gray" streaks which is also nice. Highly recommend if you think the standard is too much chrome. Looks good even with lower grille chrome strip. That part is much harder to replace.

These mirrors are absolutely perfect. The blind spot is gone and I don't have a stick-on mirror!

Advantages: Blind spot is gone!

Disadvantages: None

I never liked the leather boot and it was always dirty and a pain to clean. I bought one of these and had it painted and it loogs great and is very easy to keep clean. It also provides a place to set stuff.

This suspension is definitely more track oriented but not as harsh as some people say. This kit soaks up the small bumps quite well.
A good buy for someone who is using the car for track duty.
No they are not damper and rebound adjustable. However this kit perform as well as the kits that are listed in the $2000 range on the track. Worth every penny for a track oriented car!

So there is no issue with the warning lights showing through? Do you have to cut the RPM tick marks, the fuel tick and temp tick mark for them to show through properly?

Look great

They are currently available with a specific title description for NAV/Chrono pack owners...