Click above link for more detailed images of actual kit.

If you've seen the new monster Brembo Calipers on a few of the MINIs rolling around town and feel like you need to upgrade, this is the way to go. The new style calipers are do die for and in fact may even save your life! Technically there is no reason why these will not fit on any of the Gen1 or Gen2 MINI's as the hub assembly and attachment points are all the same between the two models, but you will have to at least have a 17" to clear the diameter requirements AND likely a low offset or the right spoke design/cross section of wheel in order to clear the depth of this kit.

2 - 12.4" cross drilled and slotted front brake rotors
2 rear brake rotors
2 coated red floating 4 piston brake calipers and carriers with the John Cooper Works logo
front Brake pads
rear pads
Hardware required for installation
Customer information with permitted wheel dimensions
Brake Wear sensors

Fits the following wheels without any spacers:

MINI LA wheel Flame Spoke 97
MINI LA wheel, Crown spoke 104
17'' LAW Multi-Spoke R108
17" LMR Cross Spoke Challenge R112
17" WTW Cross Spoke R114
18" LMR Cross Spoke R113
17" WTW Flame Spoke R97
17" LMR Crown Spoke R104
17" LMR Flame Spoke R97

Will most likely fit many other wheels with small wheel spacers sold separately. No data is available as to the cross section of the caliper and rotor at this time. This is a great performance upgrade that is actually one of the most reasonably and very competitively priced BBK's MINI's on the market.

Fits these MINI models:
all current. Please note you will need to have a confirmed picture of the wheel you have fitting OVER these brakes or be ready to possibly buy new wheels as they are huge and not many wheels will clear them. It is likely that if you have seen a MINI with Brembo brakes and the same wheels you have that these too will fit, however it will be best to confirm before buying.

box dim: 26x14x14


If you want to install Stainless lines along with this kit AND you have a gen1 MINI you will need the gen2 Stainless brake lines. The rear trailing arms need a small bit of the metal 3/4" x 2") removed to allow the bracket for the ebrake mechanism to work. This also allows the rear caliper to float as the pads wear.

Copy and paste for more info:

http://www.mini2.com/forum/wheels-tyres-brakes/181268-r56-john-cooper-works-brembo-brakes-my-r53.html

Priced individually