This replacement MSD Ignion Coil intensifies the spark output of your ignition,
helping your air/fuel intake charge burn more completely. This is
especially good for cars with smaller supercharger pulleys and other
upgrades. The results are smooth idle and improved mid-range power.
Installation is a snap--the coils connect right to your factory wiring
but the four copper sleeves in the corners will need to be drilled out
about 1/16" to allow for the stock studs to fit. It is a good idea to
use higher quality plugs and ignition wires with this coil pack. Please
check out our Kingsborne wires and Beru and Denso spark plugs.
SPECS:
Maximum Voltage: 40,000 volts
Primary Resistance: .051 ohms
Secondary Resistance: 12K ohms
Inductance: 7 mH; Turns Ratio: 77:1
IMPORTANT:
It is best to remove factory bolts from your factory coil, remove
rotating sleeves from around factory bolt and use liberated factory
bolts through the corners of the MSD coil.
___________________________________________________________________________________
The MSD Ignition Coil is one of the many MINI Cooper Parts and Accessories that we carry and will fit the following MINI Cooper Models and Years:
Gen1 MINI:
R50 MINI Cooper Hatchback: 2002, 2003, 2004, 2005, 2006
R52 MINI Cooper Convertible: 2004, 2005, 2006, 2007, 2008
R52-S MINI Cooper S Convertible: 2004, 2005, 2006, 2007, 2008
R53-S MINI Cooper S Hatchback: 2002, 2003, 2004, 2005, 2006
R-Fifty WHAT?? Confused about what model MINI you have? We’re here to help. Check this out for more information.