Utilizing Bilstein’s monotube shock absorber design for heat dissipation and ride control, the PSS10/ B16 Coil-Over System adds a matched performance spring and threaded ride height adjuster to provide a complete suspension system for a vehicle.
The fully adjustable monotube gas shock absorbers offer nine precise compression and rebound settings, from comfort to competition. The front and rear progressive rate springs allow for the accurate adjustment of a vehicle's ride height, stance, cornering balance and ride quality to maximize performance.
About the Bilstein Shocks Included in this System:
All Bilstein gas pressure struts/inserts and gas pressure shock absorbers operate on the same principle. They are manufactured with the rod pointing down into the strut tube, thereby utilizing the thicker, stouter body portion of the shock absorber to dissipate side loads. Consequently, due to the increased diameter and surface of the pressure tube, the Bilstein gas pressure strut/insert or shock is better suited to take increased side loads when compared with the conventional version.
Additional advantages, based on development strongly influenced by the motorsport industry, include greater stability, better road handling, and accurate steering. This combined with extremely high quality manufacturing and materials, means Bilsteins will last approximately four times as long as Original Equipment.
Battling Heat Build Up:
Conventional shocks trap the heat within the shock body and prevent adequate dissipation, making them prone to heat build up, fade and eventual failure.
Bilstein's patented design allows the excessive heat from the oil to transfer to the outer surface of the shock body and dissipate more efficiently. The dividing piston also permits the oil to expand as heat builds, preventing aeration (foaming) and viscosity loss. This allows the shock to maintain full damping characteristics as temperatures rise.
The tube of a Bilstein gas pressure shock or strut is fabricated using a special extrusion method. This process achieves an extremely tight peak-to-valley tolerance and maintains consistent wall thickness. Bilstein's seamless monotube design provides superior tube strength while maximizing heat dissipation and shock life.
Ride Comfort and Performance Without Compromise:
The piston head design allows independent tuning of the compression and rebound damping forces to provide optimum ride comfort and performance without compromise. It features fewer parts than most conventional designs. The product's simple, yet exceptionally functional digressive design contributes to the extreme durability and long life of Bilstein Shock Absorbers.
Bilstein's shock bodies are precision formed through a unique seamless extrusion process. This provides superior strength along with high finish tolerances. The shock body is then treated with a special paint finish durable enough to withstand grueling 240-hour salt spray tests. The finished body is mated with a solid, induction-hardened steel chrome plated and polished shaft, machined valving components and highest quality seals.
Bilstein products are backed by an aftermarket lifetime warranty.
Front Lowered Height: 30-50mm
Rear Lowered Height: 30-50mm
The Bilstein: B16: Coilover Kit: Gen 3 is one of the many MINI Cooper Parts and Accessories that we carry and will fit the following MINI Cooper Models and Years:
F55 MINI Cooper Four Door: 2015, 2016, 2017, 2018, 2019, 2020
F55 MINI Cooper S Four Door: 2015, 2016, 2017, 2018, 2019, 2020
F56 MINI Cooper Hatchback: 2014, 2015, 2016, 2017, 2018, 2019, 2020
F56 MINI Cooper S Hatchback: 2014, 2015, 2016, 2017, 2018, 2019, 2020
F57 MINI Cooper Convertible: 2016, 2017, 2018, 2019, 2020, 2021
F57 MINI Cooper S Convertible: 2016, 2017, 2018, 2019, 2020, 2021
R-Fifty WHAT?? Confused about what model MINI you have? We’re here to help. Check this out for more information.
There are no product reviews for this product yet.
If you have purchased this item and would like to leave a product review please sign in to add your review.